LiPo Batteries for Two-Way Radios
It’s hour fourteen of a storm restoration shift. The crew has been up since before dawn, lines are still down across three counties, and the supervisor’s radio just chirped its low-battery warning. Nobody has a charger within thirty miles. Battery capacity looks like a minor spec on paper, but on a night like that it decides whether the team stays connected or goes quiet.
New London Technology carries high-capacity LiPo batteries for professional two-way radios, built for crews who need more from a single charge. We’re a factory-authorized dealer and a factory service center, so the people who answer your questions work with these radios every day. Whether you run a utility, a public safety agency, a field operation, or a busy facility, we can help you find a battery that matches your radio and the length of your shifts. Browse the collection below, or call a radio specialist if you’d like to talk it through.
Why LiPo? What Sets These Batteries Apart
The batteries in this collection use PolyMax HPC LiPo cells, which are designed around one idea: get more useful work out of every pack. Compared with standard battery options, they offer several practical advantages.
Longer Runtimes
Higher capacity means more talk time between charges. Many of the packs here reach 4,000 mAh or more, which gives crews room to finish a long shift without swapping batteries or hunting for a charger. If your people routinely work overtime, that extra cushion adds up fast.
Greater Cycle Life
These batteries are rated for 500 or more charge cycles, compared with roughly 300 for typical Li-Ion cells. In plain terms, they hold up longer under daily use, so you replace them less often. For agencies managing a large fleet, fewer replacements mean a lower long-term cost.
Lighter Weight
A radio that rides on your hip for twelve hours is a radio you notice. LiPo packs are significantly lighter than NiMH batteries of similar capacity, which helps with comfort on long days, especially for crews on foot.
Low Self-Discharge
Spare batteries sitting in a drawer or a truck lose charge over time. LiPo cells here self-discharge at under 5% per month, about a third of the rate of NiMH. That means a spare pack is far more likely to be ready when you grab it.
Extended Warranty
Each pack carries a 24-month warranty covering capacity (down to 80%) and a separate 24 months for materials and workmanship. That’s longer coverage than many people expect from a replacement battery.
Who Benefits Most From LiPo Batteries
Utilities and Storm Response
Restoration crews work long, unpredictable hours with limited access to power. Extra runtime and a long shelf life make LiPo packs a good fit for trucks and emergency kits alike.
Public Safety and Fire Service
Police, fire, and EMS personnel can’t afford a radio that fades mid-incident. If you’re upgrading your fleet or planning a refresh, our public safety radio page is a good place to start.
Federal Land and Field Teams
Crews working in remote country often go days between charging opportunities. If your teams support BIA, BLM, or NPS operations or wildland fire work, high-capacity packs can keep radios running through long deployments.
Facilities, Events, and Security
Hospitals, campuses, warehouses, and event staff rely on radios from opening to close. Our facility and warehouse collection can help you build a setup that matches those shifts.
What’s in This Collection
The collection currently lists LiPo batteries for several popular radio families, including Motorola XTS1500, XTS3000, HT750, and APX6000, Kenwood TK2140, TK2180, NX200, and NX5000 series, and the Harris P7100. Capacities range from 3,000 mAh up to 5,100 mAh, so you can pick a pack that fits your runtime needs. Each listing spells out the voltage, capacity, and watt-hours, which makes comparing options straightforward.
Availability moves quickly with batteries, and several models sell through fast. If the pack you need shows as sold out, request a quote or call us. We’ll check on availability and suggest a good alternative if one exists.
How to Choose the Right LiPo Battery
Start With Your Exact Radio Model
Radio families can look nearly identical and still use different battery designs. Read the model listing on the product page, check the label on your radio, and try our Radio Finder if you’re unsure. We’re glad to confirm compatibility before you order.
Match Capacity to Your Shift
Don’t just chase the biggest number. Think about how long a typical shift runs and how often your people can recharge. A crew that works eight-hour days near a charging station has different needs than a team deployed for a week. Higher capacity packs can mean a bit more bulk, so weigh runtime against comfort.
Use the Right Charger
These batteries can be charged with Endura, Logic, or OEM chargers designed for Li-Ion batteries. Using a compatible charger protects your battery and keeps your warranty intact. Our two-way radio chargers include desktop models and in-vehicle options.
Mind the Work Environment
Standard LiPo packs aren’t automatically approved for hazardous locations. If your crews work around flammable gases, vapors, or dust, check our intrinsically safe batteries instead of assuming a general-purpose pack will do.
Planning for Mixed Fleets
Few organizations run one brand from top to bottom. A county might carry older Motorola portables in the road department, Kenwood radios in maintenance, and newer P25 units in the sheriff’s office. A single power strategy rarely covers everyone, so it helps to map each radio to the right battery early.
If your organization uses Tait Communications equipment, our team can walk you through battery and accessory options for each radio in your fleet. The same goes for networks built around TB9400 base stations, where the portables on the system need dependable power to make the infrastructure worth having. For infrastructure questions and installation help, visit our services page and learn more about support for TB9400 base stations and similar systems.
Newer handhelds have their own battery requirements. The XL-300P portable radio from L3Harris is a P25 portable that also brings together LTE/5G, Wi-Fi, and satellite connectivity, and teams adopting it should confirm power options for that specific model. You can compare the XL-300P portable radio with other P25 options in our P25 collection.
The BKR9500 deserves the same care. Confirm which batteries are approved for it, and don’t assume a pack made for another model will work. Our battery finder by radio brand and model sorts products by radio, which makes it much easier to track down the right battery for the BKR9500 and others. For other choices across brands, you can browse our full PolyMax HPC battery line and our smart batteries. If you’d like to see what else is available from Tait Communications and other manufacturers in specialized formats, ask our team.
Round Out Your Power Plan
A good battery is only one piece of the puzzle. Keep a clamshell battery holder in the truck as a backup when charging isn’t possible, and consider our primary lithium batteries for long deployments. A sturdy holster or case helps protect the radio and battery together. Our two-way radio batteries page shows the full range if you want to compare chemistries side by side.
Factory-Authorized Sales and Service
When you buy from a factory-authorized dealer, you get more than a part number. We can answer compatibility questions, help with warranty issues, and handle repairs in-house, so you don’t have to send radios back to the manufacturer. Our configurations are NDAA-compliant, and we can supply documentation for your procurement paperwork. Our compliance page is a good place to start. We offer volume pricing on larger orders and ship quickly across the US. You can reach a radio specialist at +1 (434) 525-0068, Monday through Friday, 8 AM to 4:30 PM ET.
Not sure what your fleet needs? Tell us which radios you carry, how long your shifts run, and where your teams work. We’ll help you build a battery plan that fits without overbuying.
New London Technology is ready to help your team stay powered and connected, from a single battery to a full fleet. Request your bulk quote today.
Frequently Asked Questions About LiPo Batteries
1. What are LiPo batteries?
LiPo (lithium-polymer) batteries are rechargeable batteries known for their lightweight design and high energy density, making them suitable for compatible electronic devices.
2. What are LiPo batteries used for?
LiPo batteries power various electronic devices and specialized equipment where lightweight construction and rechargeable performance are important.
3. Are LiPo batteries rechargeable?
Yes, LiPo batteries are rechargeable. Always use a compatible charger and follow the manufacturer's charging and storage instructions.
4. How do I choose the right LiPo battery?
Check the required voltage, capacity, dimensions, connector type, and device compatibility before purchasing a replacement.
5. How should LiPo batteries be stored safely?
Store LiPo batteries according to the manufacturer's guidelines, away from excessive heat, moisture, and physical damage. Do not use swollen or damaged batteries.
6. Where can I buy LiPo batteries in the United States?
New London Technology offers battery products and accessories. Contact the team to confirm availability and find a LiPo battery that meets your equipment requirements.
